Wooden Anchor DIY Wall Art

Wooden Anchor DIY Wall Art

What You'll Need: 

Wood Anchor
5" Wood Star
3 Ply Jute
Red Acrylic Paint 
White Acrylic Paint 
Cobalt Blue Acrylic Paint
Paint Brushes
Painter's Tape
Sanding Block
Scissors
Hot Glue

Courtesy of Darice®
Difficulty Level: Intermediate
Approximate Time: 2 Hours (Not Including Dry Time)

How to Make Wooden Anchor DIY Wall Art


When it comes to DIY decor, it's sink or swim! Stay above the current this summer with our Wooden Anchor DIY Wall Art project. Whether you decorate your door or your mantle with it, this DIY anchor is sure to impress anyone that sees it!
 
  • 1 Paint stars

    Paint the large star red and the small center star white. Set aside to dry. 

  • 2 Mask anchor & paint stripes

    Mask off the anchor into 1.5" sections. Paint white stripes first, let dry and then remove the tape. Adjust the tape to cover white areas and then paint on the blue sections. Allow to dry and then remove tape. 

  • 3 Sand edges & attach stars to anchor

    Sand the edges and surface of the anchor and the star. Hot glue the star to the top center of the anchor.

  • 4 Cut & wrap jute

    Cut a 36" section of jute. Loop end of jute about 1" and hot glue to the top of the anchor on the back. Wind the jute several times through hole, around the star and down around the bottom of the anchor. Hot glue the end of the jute to the back of the anchor.